(Mouse over any image to view)
Cruise control, drive by wire, GM CAN with HND-3 Photo Main

Cruise control, drive by wire, GM CAN with HND-3

Weighs 2.000lbs.

Direct plug-in cruise control for GM LS drive-by-wire engines, the CRC Series plugs directly into your OEM LS throttle pedal for not only simple installation, but reliable operation and connectivity. Self-learning calibration makes this system a snap to use, with no DIP switches or charts to follow! The CRC-1000 obtains its information from the included diagnostic connector and throttle pedal connections, allowing an extremely simple installation for drive-by-wire GM CAN bus applications. The CRC-1000 is ideal for applications using all matched OEM drivetrain control components. The CRC-2000 variation features a discrete VSS input (fixed 4,000 PPM, your application may require the use of an SGI-5E if a 4,000 PPM signal is not present), usable when a diagnostic connector is unavailable. While still plugging directly into the throttle pedal in these LS-based systems, the CRC-2000 provides a flexible approach, perfectly suited to cases with a mixture of LS-based OEM and specific aftermarket powertrain control components. Both the CRC-1000 and CRC-2000 fit: 2005-2013 Corvette 2008- up GM Full Size Truck/Van/SUV with throttle pedal contain inline 6-pin connector 2010-2014 Camaro 2008-2010 Pontiac G8 GT (verify pedal connector type first) GM Connect & Cruise packages * Does not fit Pontiac GTO or Holden applications ** Neither the CRC-1000 or CRC-2000 are considered universal cruise control packages, their proper operation can only be expected when interfaced with the LS-based applications outlined above. Any ECM speed calibration, or software updates which have affected the pedal specifications may prevent the CRC-1000 or CRC-2000 from functioning. Your choice of switch/turn signal level is supplied. Inputs for power, ground, and a connection to your existing brake light switch are all that is required (along with VSS input on CRC-2000). Additionally, an output is provided for a cruise-on indicator. Module measures 3.5" x 3.5" x .75"

This part fits most; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.

Please refer to the terms of use about part choice and fit responsibility.


CRC-1000-3
$560.00 Each